Examples

Data Manipulation and Events

Example - Create the sum of analog1 and analog2 values and send the new value as cp1. Also monitor the sum against predefined thresholds. If a threshold is exceeded, dispatch an event. Note that it is also good practice to check the analog values exist (and are a ‘number’ type) before trying to use them, or the script will fail.

load('senquip.js');
let ALARM_THRESHOLD = 55;
let WARN_THRESHOLD = 20;

SQ.set_data_handler(function(data) {
  // The current measurement data is passed in as a string.
  // To easily access values, convert the string into a JSON object
  let obj = JSON.parse(data);

  // Check measurement values (analog1, analog2) exist in the data object before using them
  // or the script will throw an error and stop execution
  if ((typeof obj.analog1 === "number") && (typeof obj.analog2 === "number")) {

    let sum = obj.analog1 + obj.analog2;
    SQ.dispatch(1, sum);

    if (sum >= ALARM_THRESHOLD) {
      SQ.dispatch_event(1, SQ.ALARM, "Sum critical");
    } else if (sum >= WARN_THRESHOLD) {
      SQ.dispatch_event(1, SQ.WARNING, "Sum high");
    }
  } else {
    SQ.dispatch_event(1, SQ.INFO, "No Data");
  }
}, null);

Example - Scale and offset values current1 and current2, and send them as the new values cp1 and cp5 with varying precision.

load('senquip.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);
  SQ.dispatch_double(1, 42.1*obj.current1 + 1.51, 0); // No decimal
  SQ.dispatch_double(5, -3.1416*obj.current2 + 9, 3); // 3 decimal places
}, null);

Filtering & Persistent Variables

Example - Implementation an exponential moving average across consecutive measurement cycles. Highlights the use of global variables to store information between measurement cycles.

load('senquip.js');
let filtered_value = 0;

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);
  let alpha = 0.3;
  let new_sample = obj.current1;
  filtered_value = (alpha * new_sample) + (1 - alpha)*filtered_value;
  SQ.dispatch(1, filtered_value);
}, null);

Note

The above example using global variables will only work if the device is set to ‘Always On’. Information in global variables is lost when the device sleeps or resets.

Example - Use persistent variables which keep their value when the device sleeps or hibernates. This example filters measurements across sleep cycles and keeps track of a service interval.

load('senquip.js');

// Give each NVS variable an easy to read index
let NVS_FILTER_VALUE = 1;
let NVS_SERVICE_HRS = 2;
let NVS_VALID = 3;

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  let nvs_is_valid = true;
  if (SQ.nvs_load(NVS_VALID) === 0) {
    // NVS values are uninitialised or have been lost
    SQ.nvs_save(NVS_VALID, 1);
    nvs_is_valid = false;
 }

  let alpha = 0.3;
  let new_sample = obj.ambient;
  let filtered_value = SQ.nvs_load(NVS_FILTER_VALUE);
  if (nvs_is_valid) {
    filtered_value = (alpha * new_sample) + (1 - alpha)*filtered_value;
  } else {
    // Initialise filter to the current value if nvs is lost or un-initialised
    filtered_value = new_sample;
  }
  SQ.nvs_save(NVS_FILTER_VALUE, filtered_value);
  SQ.dispatch(1, filtered_value);

  let service_hours = SQ.nvs_load(NVS_SERVICE_HRS);
  SQ.dispatch(2, service_hours);

}, null);

SQ.set_trigger_handler(function(tp) {
  if (tp === 1) {
    // Add 50 to the service hours
    let service_hours = SQ.nvs_load(NVS_SERVICE_HRS);
    SQ.nvs_save(NVS_SERVICE_HRS, service_hours + 50);
  }
}, null);

Parsing CAN Data

Example - Look for a specific PGN, parse the first 2 bytes of CAN data from Hex format, convert to a 16-bit signed value, then apply a fixed scale and offset to the result.

load('senquip.js');

// Function to convert a 16-bit unsigned integer to 16-bit signed value
function int16(x) {
  if (x > 32767) {x = x - 65536;}
  return x;
}

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  if (typeof obj.can1 !== "undefined") {
    for (let i = 0; i < obj.can1.length; i++) {

      // Look for the specific PGN:
      if (obj.can1[i].id === 0x18FF1CF2) {

        // Extract the first 4 Hex characters (2 bytes):
        let d = SQ.parse(obj.can1[i].data, 0, 4, 16);

        // Convert to a signed 16-bit value and scale/offset the result:
        SQ.dispatch_double(1, int16(d) * 0.125 + 4.5, 1);

        // Extract the next 4 Hex characters and reverse the byte order:
        let e = SQ.parse(obj.can1[i].data, 4, 8, -16);

        // Keep result as an unsigned number and scale:
        SQ.dispatch_double(2, e * 0.5, 1);
      }
    }
  } else {
    SQ.dispatch_event(1, SQ.WARNING, "No CAN data available");
  }
}, null);

J1939 Fault Codes

Example - Determine when a J1939 Fault code is active on CAN1 using some funky byte manipulation.

load('senquip.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  if (typeof obj.can1 !== "undefined") {
    for (let i = 0; i < obj.can1.length; i++) {
      // Look for the fault code PGN from any SA:
      if ((obj.can1[i].id>>8) === 0x18FECA) {
        // Decode DTC according to Conversion Method 4
        let byte34 = SQ.parse(obj.can1[i].data, 4, 4, 16, SQ.U16);
        let byte5 = SQ.parse(obj.can1[i].data, 8, 2, 16, SQ.U8);
        let byte6 = SQ.parse(obj.can1[i].data, 10, 2, 16, SQ.U8);
        let spn = byte34 | (byte5 & 0xE0)<<11;
        let fmi = byte5 & 0x1F;
        let oc = byte6 & 0x7F;
        if (spn !== 0) {
          let s = "DTC SPN: " + JSON.stringify(spn) + " FMI: " + JSON.stringify(fmi);
          SQ.dispatch_event(1, SQ.ALARM, s);
        }
      }
    }
  } else {
    SQ.dispatch_event(1, SQ.WARNING, "No CAN data available");
  }
}, null);

Transmit CAN Data

Example - Regularly send a CAN message using a timer, containing measurements from the device.

load('senquip.js');
load('api_timer.js');

let en_tx = false;
let can_msg = "01234567";

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);
  if (typeof obj.analog1 === "number") {
    let value = Math.floor(obj.analog1*100);
    can_msg = chr(value & 0xFF) + chr((value>>8) & 0xFF) + chr((value>>16) & 0xFF);
    en_tx = true;
  } else {
    en_tx = false;
  }
}, null);

// Set up a repeating timer to handle the CAN transmit:
Timer.set(1000, Timer.REPEAT, function() {
  // Do nothing if tx is not enabled:
  if (en_tx === false) return;

  // Send an extended message:
  CAN.tx(1, 0x18FB1055, can_msg, can_msg.length, CAN.EXT);
}, null);

Use of Triggers

Example - Set up a trigger handler to respond to button presses from the Senquip Portal.

load('senquip.js');
load('api_serial.js');

SQ.set_trigger_handler(function(tp) {
  if (tp === 1) { IO.write(1, IO.VIN); }  // Change IO1 to VIN
  if (tp === 2) { IO.write(1, IO.OFF); }  // Turn IO1 off
  if (tp === 3) {
    let s = "HELLO WORLD!";
    SERIAL.write(1, s, s.length);  // Send string over serial port (RS232 or RS485)
  }
  if (tp === 4) { SERIAL.write(1, "\x48\x45\x58", 3); } // Send 3 bytes in HEX format
}, null);

Use of Timers

Example - Set up a trigger handler to immediately send one serial message, and then send a second message one second later.

load('senquip.js');
load('api_timer.js');
load('api_serial.js');

SQ.set_trigger_handler(function(tp) {
  if (tp === 1) {
    // When Portal button #1 is pressed, immediately send 1st serial string
    let s1 = "TURN ON";
    SERIAL.write(1, s1, s1.length);
    // Set a non-repeating timer for 1000 ms, which will call the inline function().
    Timer.set(1000, 0, function() {
      // After one second, send the 2nd serial string
      let s2 = "TURN OFF";
      SERIAL.write(1, s2, s2.length);
    }, null);
  }
}, null);

String Enumerations

Example - Send a string enumeration based on an analog voltage measurement. It also gracefully handles the case where ‘analog1’ does not exist in the data message, in which case ‘typeof obj.analog1’ would have the value ‘undefined’ (rather than ‘number’).

load('senquip.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);
  let s = "No Signal";
  if (typeof obj.analog1 === "number") {
    if (obj.analog1 >= 4.5) { s = "Error"; }
    else if (obj.analog1 >= 3.5) { s = "High"; }
    else if (obj.analog1 >= 2.5) { s = "Normal"; }
    else { s = "Low"; }
  }
  SQ.dispatch(1, s);
}, null);

Custom HTTP Message

Example - Send a custom HTTP POST message.

load('senquip.js');
load('api_endpoint.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);
  let out = {
    id: obj.deviceid,
    time: obj.ts,
    flow_rate: obj.current1 * 1000
  };
  HTTP.post(JSON.stringify(out), "Content-Type: application/json\r\n");
}, null);

Custom Settings

Example - Retrieval and use of custom settings from a script. The example also dispatches the settings to the Portal so a record of the current value is kept. This may be desirable for debugging, traceability or reporting purposes.

load('senquip.js');
load('api_config.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // Get the settings:
  let num_threshold = Cfg.get('script.num1');
  let str_setting = Cfg.get('script.str1');

  // Compare measurement against the custom setting:
  if (obj.analog1 > num_threshold) {
    SQ.dispatch_event(1, SQ.ALARM, "Custom Alarm");
  }

  // Send the custom settings to the Portal for reporting/logging purposes:
  SQ.dispatch(1, num_threshold);
  SQ.dispatch(2, str_setting);
}, null);

Bluetooth

Example - An example of how to transmit and receive GPS data from one device to another using Bluetooth advertisements.

load('senquip.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // If we have a valid GPS position, broadcast this to other devices via BLE
  if (typeof obj.gps_lat !== "undefined") {
      let ble_data = SQ.encode(obj.gps_lat,SQ.FLOAT) + SQ.encode(obj.gps_lon,SQ.FLOAT);
      BLE.sq_adv(ble_data);
  }

  // Check for BLE data from nearby devices
  if (typeof obj.ble !== "undefined") {
    for (let i = 0; i < obj.ble.length; i++) {
      // Check the message contains the 'Senquip Manufacturer Specific' header
      let sl = obj.ble[i].data.slice(2, 8);
      if (sl === "ff710a") {
        // We have found a message from another device
        // Extract the lat and long of the other device:
        let lat = SQ.parse(obj.ble[i].data,8,8,16,SQ.FLOAT);
        let lng = SQ.parse(obj.ble[i].data,16,8,16,SQ.FLOAT);
        // Calculated the distance to us:
        let meters = SQ.distance(lat, lng);
        SQ.dispatch(1, meters);
      }
    }
  }
}, null);

Example - Send data via Bluetooth to the Senquip Mobile App.

Note

The Senquip Mobile app is under development. The following example works with App version 1.0.0

load('senquip.js');

let APP_FORMAT_ID = "\x80";

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // To send text, the first byte must always be \x80 so the app knows how to interpret the data.
  if (typeof obj.analog1 !== "undefined") {
    let fuel_level = obj.analog1 * 205;
    let ble_data = APP_FORMAT_ID + "G472 - Fuel Level: " + JSON.stringify(fuel_level);
    BLE.sq_adv(ble_data);
  }

}, null);

Files

Example - Log ambient temperature to a CSV file. Roll over to a new file every hour.

load('senquip.js');
load('api_file.js');
load('api_timer.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // Create a filename containing the date and hour,
  // therefore every hour the filename will change.
  let filename = Timer.fmt("data-%F-%H.csv", Timer.now());

  // Create the new line of data for the file, where the first column is the time
  // and second column is the ambient temperature
  let new_line = Timer.fmt("%T", Timer.now()) + "," + JSON.stringify(obj.ambient) + "\n";

  // Append the new line to the file
  let bytes_written = File.write(new_line, filename, "a");

  // Check for error
  if (bytes_written === 0) {
    // Failed to write file
  }

}, null);

Warning

This example will continue to write files until the filesystem is full. Once the filesystem is full, all further file writes will fail.

Example - Demonstration of reading and writing values to a file. The file remains on the filesystem and is re-loaded every time the device reboots or sleeps. Note: frequent file writes will cause the FLASH memory to wear.

load('senquip.js');
load('api_file.js');

let SETTINGS_FILENAME = "settings.cfg";
let settings = {};

function load_from_file() {
  let file_str = File.read(SETTINGS_FILENAME);
  if (file_str) {
    // Load file into settings structure
    settings = JSON.parse(file_str);
  } else {
    // Failed to read file, create defaults
    settings = {
      a: "String Value",
      b: 1234,
      c: [1, 2, 3, 4]
    };
  }
}

// Load from file the first time after booting
load_from_file();

SQ.set_data_handler(function(data) {
  SQ.dispatch(1, settings.a);
  SQ.dispatch(2, settings.b);
  SQ.dispatch(3, settings.c[3]);
}, null);

SQ.set_trigger_handler(function(tp) {
  if (tp === 1) {
    // Change a settings value
    settings.b++;

    // Write updated settings to file
    let bytes_written = File.write(JSON.stringify(settings), SETTINGS_FILENAME);

    // Check for error
    if (bytes_written === 0) {
      // Failed to write file
    }
  }
  if (tp === 2) {
    // Manually load settings from file
    load_from_file();
  }
}, null);

Time of Day

Example - Change script behaviour based on the time of day. In this example the output is turned on every cycle but only if the time is between 7am to 7pm.

load('senquip.js');
load('api_timer.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // Create a current time object
  let utc_str = Timer.fmt("{hour:%H,minute:%M,second:%S}", Timer.now());
  let utc = JSON.parse(utc_str);

  // Apply a local timezone offset (this could also be a custom setting)
  let utc_offset = 10; // AEST
  let hour = utc.hour + utc_offset;
  if (hour >= 24) hour = hour - 24;

  // Turn output on for 120 seconds between certain hours of the day
  // (make sure the base interval is greater than 120 seconds to run this example!)
  if ((hour >= 7) && (hour <= 19)) {
    IO.write(1, IO.VIN);
    Timer.set(120000, 0, function() {
      // Turn off output after 120s
      IO.write(1, IO.OFF);
    }, null);

  }
}, null);

Modbus

Example - Send a custom Modbus packet via Serial.

load('senquip.js');
load('api_serial.js');

SQ.set_data_handler(function(data) {
  let obj = JSON.parse(data);

  // Create a Modbus command
  // \x02 = Slave address 2
  // \x06 = Modbus Function 6 (Write Holding Register)
  // \x00\x01 = Register Address 1
  // \x00\x08 = Value 8
  let cmd_str = "\x02\x06\x00\x01\x00\x08";

  // Calculate and encode CRC
  let crc = SQ.crc(cmd_str);
  let crc_str = SQ.encode(crc, -SQ.U16);

  let modbus_str = cmd_str + crc_str;
  SERIAL.write(1, modbus_str, 8);

}, null);