Welcome to the Senquip UNI-Z1 User Guide

PDF Version of this User Guide.

Contents:

• Introduction
  • Capability at Scale
  • Typical Applications
  • Key Features
• First Connection
  • Before You Begin
  • Step 1 - Create or Sign In to Your Senquip Portal Account
  • Step 2 - Add Your Device to the Senquip Portal
  • Step 3 - Install the SIM Card
  • Step 4 - Apply Power
  • Step 5 - Wait for Cellular Connection
  • Step 6 - Put the Device in Setup Mode
  • Step 7a - Configure the Network Using the Senquip Connect App (Recommended)
  • Step 7b - Configure the Network Using the Embedded Web Server
  • Step 8 - Continue Setup in the Senquip Portal
  • Troubleshooting
• Regulatory Information
  • CE Declaration of Conformity
  • RCM Compliance
  • FCC statement
• Installation
  • Opening the Box
  • Mounting
  • User Access
  • SIM Card Installation
  • Wiring Guide
  • Initial Setup
  • LED Indicators
  • Firmware Updates
  • Factory Reset
  • Passwords
• Setup Mode
  • Entering Setup Mode
  • Configuring the Device
• Power Supply
  • Permanent power
  • Internal Rechargeable Battery
  • Low Power Operation
  • Freight Mode
• General Setup
  • Measurement and Transmit Intervals
  • Power Supply Settings
  • Settings
• Internal Sensors
  • Tamper sensor
  • Accelerometer
  • Temperature sensor
  • GPS
  • Bluetooth interface
  • Internal sensor settings
• External Sensors
  • Inputs and Outputs
  • Serial interface
  • CAN Bus interface
  • Calibration
  • Warnings and Alarms
  • External Sensor Settings
• Scripting
  • Risks
  • Access
  • Writing and deploying a script
• Network Connection
  • Wi-Fi specification
  • Cellular specification
  • Satellite Connectivity
  • Network Interfaces and Services
  • Network Requirements
  • Connecting to a Wi-Fi or LTE Network with the Senquip Connect App
  • Connecting to a Wi-Fi Network with the Embedded Webserver
  • Connecting to an LTE Network with the Embedded Webserver
  • Network settings
• Endpoint Setup
  • Data security
  • Data format
  • Data Buffer
  • UDP
  • HTTP
  • HTTPS
  • MQTT
  • MQTT over TLS
  • Settings
• Senquip Portal
  • Create a Senquip Portal Account
  • Creating a Group
  • Add Devices to a Group
  • Finding Devices and Groups
  • Group Management
  • Senquip Vision Dashboards
  • Device Data Page
  • Management and Hosting on the Senquip Portal
• Mechanical Specification
• Maintenance
  • Replacing the LTO Battery
• Frequently Asked Questions
  • Introduction
  • Senquip Portal
  • Network
  • GPS / GNSS
  • Measurements
  • Power
  • Setup
  • Operation
  • Scripting
• Glossary